ANTIGUA BALUSTRADE STYLE


Elevation View

3D View

Production View

POST PROFILES

The selected post rail is to be INSERT as manufactured by Shutters R Us Franchising Systems (Aust) Pty Ltd or approved contractor (02) 80911636 or Email info@millenniumbalustrades.com.au
50 x 50 mm, 50 x 80mm and 50mm Dia. options in structural grade 6082 T6 Aluminium with high magnesium content with integrated glazing pockets and exclusive 'Spider Web Core. Posts may be 180º, 90º or single glazed rebate endpost as required in the design configuration.

POST FIXINGS

The preffered Post Fixing is to be INSERT as manufactured by Shutters R Us Franchising Systems (Aust) Pty Ltd or approved contractor (02) 80911636 or Email info@millenniumbalustrades.com.au
Directly fixed to substrate without the use of friction fixings. Welded Base plates may be used as per manufacturers directions to code compliance. Site fixing options may include core hole or face fixing or welded bases. Direct M12 Stainless Steel all thread bar secured by Chemical Anchor, proprietary offset edge fixed system (in compliance with D2.16 (g) (ii) (A) or embedment such as core hole.

HANDRAIL PROFILES

The selected Handraill is to be INSERT as manufactured by Shutters R Us Franchising Systems (Aust) Pty Ltd or approved contractor (02) 80911636 or Email info@millenniumbalustrades.com.au
The handrail is discreetly fixed to the post via Millennium designed corner stake. There are no visible fixings.

INFILL PROFILES

The selected Infill is to be INSERT as manufactured by Shutters R Us Franchising Systems (Aust) Pty Ltd or approved contractor (02) 80911636 or Email info@millenniumbalustrades.com.au
************************

BOTTOM RAIL & MID RAIL PROFILES

The selected bottom & mid rails are to be INSERT as manufactured by Shutters R Us Franchising Systems (Aust) Pty Ltd or approved contractor (02) 80911636Fax: 02 9700 7029 or Email info@millenniumbalustrades.com.au
Bottom & Mid rails are round circular, rectangular square edged and rectangular bevelled edged model, which complies with the foothold criteria of the BCA climbability clause D2.16 (g) (ii) (A) and is able to be secured on the edge of the hob. Bottom rail measures 37 x 28 mm with integrated glazing pocket and is to be fixed hard to structural slab or hob substract.. Alternatively the straight rectangular bottom rail 37 x 28 mm may be specified.

PERFORMANCE

The structural integrity of the balustrade must conform to BCA 1170.1 and 1170.2 AS/NZS 1170.1:2002 Structural design actions - Permanent, imposed and other actions and supplement - Commentary AS/NZS 1170.2 Supp 1:2002 Structural design actions - Wind actions - Commentary (c) The "Climbability Clause" restrictions D2.16 (g) (ii) (A) of BCA.PDF and CAD Architecturals and Graphics are available by email request or mail out hard copy. Certification of compliance from Manufacturer to be submitted at tender. This specification to be read in conjunction with:

AS 1231 (Anodized Coatings)
20 micron minimum required for unspecified use
25micron required for marine environment
AS 3715-1989 (Powder Coating)
7 year limited Applicator Warranty standard
10 year High Durability Warranty (optional)
AS 1926.1-1993 (Fencing for Swimming Pools)
AS 1926.2-1995 (Swimming Pool Safety)
AS 1170.1-1989 (SAA Loading Code)
AS 1992 (Swimming Pools Act)
AS 1170.2-1989 (SAA Loading Code)
AS 1288- 1989 Selection and Installation
1994 (5.14 Glass in Buildings) Draft revision currently
tabled (1/06/02)
AS 1874-1988 (Alloys & Castings)
(Light gauge aluminium, low Magnesium content and
unapproved welded systems will not comply)
AS 1428 (Access and Mobility)

Note:

Beware of non-conforming Balustrades deficient by way of one or more of the following:

  • Indirect base plate fixing methods including Dyna bolt equivalent
  • Light Gauge Aluminium sections (AS 1170)
  • Non-mating hybrid designs
  • Low Magnesium and non-structural Alloys 1874-1988 (Aluminium Alloys)
  • Ferrous (steel) integrated parts which will cause cathodic corrosion
  • Unprocessed laminated glass prone to delaminate especially if balustrade has exposed side fixing
  • Unstamped float glass in lieu of certified toughened glass.(AS 1288)
  • Untested 2 part post (split post systems)structures (AS 1170)
  • Uncertified pre treated Powder Coat procedure (AS 3715).

**********

******************
******************
******************
******************
******************

**********

******************
******************
******************
******************
******************

**********

******************
******************
******************
******************
******************

**********

******************
******************
******************
******************
******************

**********

******************
******************
******************
******************
******************

 

Copyright © 2006 Millennium Balustrades. All Rights Reserved,
All product names, logos and trademarks mentioned herein are the property of their respective owners.